no flash

Info

Water storage

Info rainwater tanks

Boralit offers a wide range of rainwater tanks in polyethylene. These systems are easy to install thanks to its limited weight and the tanks are guaranteed watertight.

A rainwater tank serves for storing rainwater, from the gutter. This rainwater is used for several applications:

  • Irrigate flowers, plants
  • Washing-machines
  • Water for toilets

If you use matching filters, rainwater can be used for the washing machine, the dish-washer, bath, shower,…

The underground rainwater tanks have a warranty label of 50 years on the housing against all provable fabrication errors

On the underground tanks, there is a warranty label of 50 years on the housing against all perceptible production errors. The placement instructions have to be strictly applied. On the components, there is a warranty of 2 years.

Product range

Rainwater tanks to be placed in consolidated sand (Round)

Volume: 1.000, 1.500, 2.000, 3.000, 5.000 litres

 

product5.png


Rainwater tanks to be placed in consolidated sand (Rectangular)

Volume: 1.000, 1.500, 2.000 litres

gamma2


Rainwater tanks to be placed (Cylindrical, standing up)

Volume: 1.100, 1.600 litres

product6.png


Rainwater tanks to be placed in sand (Cylindrical, laying down)

Volume: 2.400, 3.300, 6.000 litres

SP RW in zand Cylindrisch liggend.jpg


 

Options

Boralit cover: plastic pedestrian cover (class A15)

deksel


Risers

verhoogstuk

.

 

Verhoog - Type B.jpg

 

Coupling set in PE with 1 m tube and tube for coupling set (cost per meter)

Operation

A rainwater tank collects the water coming from the gutter. The tank will gradually fill up. As soon as it is full, the surplus water will overflow into the sewer or into a canal. It is important that the water collected is as clean as possible. Any leaves entering the tank will start to rot and cause an unpleasant odor.

By installing a rainwater filter, the number of times the tank has to be cleaned, will be greatly reduced. Several rainwater tanks can be coupled together to obtain a larger capacity. In this case we will provide a PVC coupling screw at the bottom of the tank. A flexible coupling of 1 meter (or, on demand, even longer) will be supplied. It is glued into the coupling screws. Our commercial service will inform you concerning the possibilities to couple. Boralit can also offer tanks which are fully equipped for rainwater recycling. These tanks are available with a volume of 2.400, 3.300 and 6.00 litres.


Certification

Standard

CE

  • Rainwater tanks
EN 12566-1 :2000/A1 :2003