Info
A pumping station is a device to pump liquid towards a
higher level. This can be of use in case of underground
parking lots, cellars, … The type of pump depends on several
factors. In order to determine the correct type of pumping
station, please contact our technical department and inform us on
the following factors:
- The vertical distance to be covered
- The horizontal distance to be covered
- The type of liquid that should be pumped (rainwater,
wastewater, faeces, …)
- The maximum flow rate
- 1 or 2 pumps
Based on these data, we can offer you the adequate pumping
station for your project.
Boralit now has a new partnership with Grundfos (pump
manufacturer).
Operation
Pumping station with 1 pump, for pumping a small flow rate,
standard model:
The liquid to be pumped enters the tank through the entrance
pipe. The pump is equipped with a floater which will activate
the pump as soon as it detects water in the tank. As soon as
the water level reaches the minimum level, the floater will descend
and the pump will be deactivated.
The pump has a built-in thermal security system. There is
no steering system needed. The pump is of the JS-250SVMA-type and
is standing freely on the bottom of the pumping station.
Pumping station with 1 pump, for pumping a small flow rate,
standard model:
The liquid to be pumped enters the tank through the entrance
pipe. In the tank you will find 1 pump and 3 floaters.
As soon as there is enough water in the tank, the first floater
will be lifted and the pump will be activated. As soon as the
level of the water sinks beneath floater nr. 1, this floater will
be deactivated and the pump will stop working. When the
liquid level reaches the third floater, the alarm system will be
activated. This pumping station comes with a steering system to
which the floaters and the pumps should be connected. This steering
system has a thermal security system for the pumps. The pumps are
of the JS-250SVMA-type and are standing freely on the bottom of the
pumping station.
Pumping station with 2 pumps, for pumping a small flow rate,
standard model:
The liquid to be pumped enters the tank through the entrance
pipe. In the tank you will find 2 pumps and 3 floaters.
As soon as there is enough water in the tank, the first floater
will be lifted and pump 1 will be activated. As soon as the
level of the water sinks beneath floater nr. 1, this floater will
be deactivated and pump 1 will stop working.
Next time floater 1 is activated, pump 2 will start
working. In case the liquid level reaches floater nr. 2, both
pumps will be activated. When the liquid level reaches the third
floater, the alarm system will be activated. This pumping station
comes with a steering system to which the floaters and the pumps
should be connected. This steering system has a thermal security
system for the pumps. The pumps are of the JS-250SVMA-type and are
standing freely on the bottom of the pumping station.
Pumping station with 1 pump, for pumping a moderate flow rate,
standard model:
The liquid to be pumped enters the tank through the entrance
pipe. In the tank you will find 1 pump and 2 sensors. As soon
as the level of the liquid in the tank reaches sensor nr.
1 the pump will start working. When the level of the
liquid reaches the lowest sensor, sensor nr. 1, the pump will
be deactivated. This pumping station comes with a steering
system to which the pump and sensors should be connected. This
steering system has a thermal security system for the
pump. The pump is of the type SEG40, EF30 or SL1.
Pumping station with 2 pumps, for pumping a moderate flow rate,
standard model:
The liquid to be pumped enters the tank through the entrance
pipe. In the tank you will find 2 pumps equiped with
sensors. As soon as there is enough liquid in the tank, the
first sensor will give a signal and pump 1 will be
activated. As soon as the level of the liquid sinks beneath
sensor 1, pump 1 will stop working. Next time sensor 1
will give a signal, pump 2 will start working. This pumping
station comes with a steering system to which the sensors and
the pumps should be connected. The pumps are of the
type SEG40, EF30 or SL1.
Product range
In order to determine the right type of pump for your project,
the following data are of great importance:
- The vertical distance (height) over which the liquid should be
pumped
- The horizontal distance (length) over which the liquid should
be pumped
- The type of liquid that should be pumped (rainwater,
wastewater, faecal water,...)
- The maximum flow rate
- 1 or 2 pumps